• <menu id="wgmu4"><tt id="wgmu4"></tt></menu>
    濟南富強門業有限公司官方網站 在線留言 聯系我們

    服務咨詢熱線

    151 6888 2846

    熱門關鍵詞: 水晶卷簾門 濟南防火卷簾門 濟南卷簾門

    公司新聞

    首頁>>新聞資訊>>公司新聞>>卷簾門的大軸是如何安裝的
    聯系我們
    濟南富強門業有限公司

    聯系人:林經理

    電話:151 6888 2846

    郵箱:527800164@qq.com

    地址:濟南市歷下區化纖廠路8號3號樓101號

    卷簾門的大軸是如何安裝的

    來源:http://www.yeesentw.com 日期:2023-06-03 發布人:fuqiang
    卷簾門能起到水平分割的作用,就像墻的作用是一樣的,一些商業門面,車庫等地方都可以用到卷簾門,開啟也比較方便,濟南卷簾門的大軸是如何安裝的呢?
    Rolling shutter doors can serve as horizontal partitions, just like walls. Some commercial storefronts, garages, and other places can use rolling shutter doors, which are also more convenient to open. How is the large axis of Jinan rolling shutter doors installed?
    一:在安裝卷簾門的大軸時,要先將掛板定好方向,并安裝到卷軸上,再用簾板裝到掛板上,在卷在卷軸上用鐵絲扎牢固。
    1: When installing the large axis of the roller shutter door, the hanging plate should be oriented and installed on the roller first. Then, the curtain plate should be installed on the hanging plate, and firmly tied with iron wire on the roller.
    二:安裝時先將套上軸承及座的光軸塞入卷軸的端孔中,對準位置后再將軸承固定螺栓擰緊,在卷軸上好之后,可以左右移動下卷筒調節位置。
    2: When installing, first insert the optical shaft with the bearing and seat into the end hole of the winding shaft, align it with the position, and then tighten the bearing fixing bolts. After the winding shaft is installed, the lower drum can be moved left and right to adjust the position.
    三:調整好位置后,光軸和卷軸固定好,光軸和軸承要用支頭螺釘固定好,卷軸在吊裝時要注意下不要碰壞軸上的簾板,可以用鋼絲繩捆扎下。
    3: After adjusting the position, the optical axis and the roller are fixed, and the optical axis and bearings should be fixed with support screws. When lifting the roller, be careful not to damage the curtain board on the shaft, and it can be tied with steel wire ropes.
    安裝注意事項
    Installation precautions
    1.在安裝卷簾門前,觀察卷簾機是否水平安裝,卷簾軸是否光滑,是否有滯卡現象,如有,應及時處理。
    Before installing the roller shutter door, observe whether the roller shutter machine is installed horizontally, whether the roller shutter shaft is smooth, and whether there is any jamming. If there is any, it should be dealt with in a timely manner.
    濟南卷簾門
    2.窗簾掛起前,應調整鏈條的下垂度,以滿足標準要求。
    Before hanging the curtains, the sag of the chain should be adjusted to meet the standard requirements.
    3.卷門機與外部電源線接觸的截面尺寸有一定要求,不小于1平方毫米。
    3. There are certain requirements for the section size of the door winder in contact with the external power line, which is not less than 1 square millimetre.
    4.在安裝的過程中一定要注意防潮,不要被雨淋,接觸水后容易使卷門機電器短路,會使卷簾門電機燒壞,影響正常使用。
    4. During the installation process, it is necessary to pay attention to moisture-proof measures and avoid being exposed to rain. Contact with water can easily cause a short circuit in the electrical equipment of the rolling door machine, which can cause the motor of the rolling door to burn out and affect normal use.
    5.連接電源時,不要反向連接電源。當電源上升并下降時,機器應立即停止工作,協調順序,并正常工作。否則會損壞卷簾門的正常使用。
    5. When connecting the power supply, do not connect it in the opposite direction. When the power supply rises and falls, the machine should immediately stop working, coordinate the sequence, and operate normally. Otherwise, it will damage the normal use of the roller shutter door.
    當我們安裝卷簾門時,我們需要注意很多細節,所以我們需要首先對安裝方法有一定的了解,只有這樣我們才能更好地安裝。還有什么事項隨時來咨詢我們http://www.yeesentw.com!
    When installing roller shutter doors, we need to pay attention to many details, so we need to first have a certain understanding of the installation method, so that we can better install it. Feel free to consult us on any other matters http://www.yeesentw.com !

    推薦閱讀/ Recommended reading

    卷簾門容易出故障的位置就是導軌、卷軸、簾板這三項,如果是電動卷簾門,那么卷門機、控制箱等部位也有可能會出現故障,下面說說它的一些故

    卷簾門材質不同作用也會不同 2023-07-13
    電動卷簾門在使用過程中您要了解什么? 2023-07-06
    電動卷簾門為什么鎖著? 2023-07-01
    卷簾門的控制功能表現在哪里 2023-06-27
    快速卷簾門常見的三種控制方式 2023-06-20
    常見商鋪卷簾門怎樣維修? 2023-06-15
    水晶卷簾門常見的四大故障以及處理 2023-06-08
    卷簾門的大軸是如何安裝的 2023-06-03
    欧美日韩中文国产一区,公司里不能穿内裤的纯h文,无码中文人妻视频2019,亚洲国产初高中生女AV
  • <menu id="wgmu4"><tt id="wgmu4"></tt></menu>